MAP2r345U3133T2
Code 223749
4 Inputs
4-input (III+DAB, IV, V, UHF) mast amplifier with 25dB gain and up to 116dBμV output level on UHF band, separate VHF/UHF amplification with independent gain adjustment (0-15dB) for each input and low noise figure. T2 technology with UHF cut band for LTE 4G @790MHz and 5G @694MHz.
Technical chars
- Built-in 5G filter at 694MHz to give connections greater protection against the elements than an external filter.
- RED Compliant: each model complies with the regulatory requirements regarding Radio Spectrum, Electromagnetic Compatibility and Safety set out in recent European directives.
- ZAMA die-cast frame with metal covers for extremely high interference shielding (LTE Free).
- The ABS outdoor protective cover has a slide opening and tilting system for the amplifier section, making the installer's work easier.
- Selector switch for switching the remote power supply to the UHF input, or to the V+U input depending on the model.
- Status LED for correct power supply and fixing clamp suitable for poles up to 60mm diameter.
MAP2r345U3133T2 | ||
Code | 223749 | |
Input no. | 4 | |
Inputs | III+DAB, IV, V, UHF; special calibration 31/33 | |
DAB, III Frequency | MHz | 174 - 240 |
Frequency IV | MHz | 470 - 558 |
V Frequency | MHz | 566 - 694 |
Frequency | MHz | 470 - 694 |
Gain | dB | III+DAB: 21; IV: 25; V: 25; |
Gain adjustment | dB | III+DAB: 15; IV: 15; |
Optical noise figure | dB | III+DAB: 5; UHF: 7 |
Outputs number | 1 | |
Output level | dBµV | III+DAB: 112; UHF: 116 |
Connectors | F female | |
Clipper | No | |
Specifications | ||
---|---|---|
Power supply voltage | V | 12 |
Absorption | mA | 80 @12V |
Impedence | Ohm | 75 |
Operating temperature | °C | -10 to +55 |
Protection | IP43 | |
Conformity | EN50083-2: 2006-06 | |
Dimensions and packaging | ||
Pieces | 1 | |
EAN code | 8016978106240 | |
Packaging dimensions | mm | 124 x 57 x 118 |
Product dimensions | mm | 120 x 50 x 105 |
Packaging weight | Kg | 0.309 |
Net Weight | Kg | 0.234 |
Weight | Kg | 0.251 |