MAP4r345UPRO5G/
Code 223772
4 Inputs
4-input (III+DAB, IV, V, UHF) mast amplifier with 40dB gain and output level up to 110dBμV or 120dBμV in UHF band selectable, separate VHF/UHF amplification, independent gain adjustments (0-15dB) for each input and low noise figure. Special calibration in the cut-off frequencies between band IV and band V and built-in 5G 694MHz filter.
Technical chars
- Built-in 5G filter at 694MHz to give connections more protection from the elements than an external filter.
- Innovative HI/Low switch that allows the maximum UHF output signal level to be adjusted to two different levels: 110dBμV and 120dBμV.
- CLIPPER Technology: unique system that limits the UHF band gain of the device to ensure the maximum available RF output level and minimize intermodulation; there is an LED that lights up when this control is activated.
- RED Compliant: each model complies with the regulatory requirements regarding Radio Spectrum Electromagnetic Compatibility and Safety set forth in recent European directives.
- ZAMA die-cast frame with metal covers for very high shielding to interference (LTE Free).
- Outdoor protective bell made of ABS is equipped with a slide opening and tilting system of the amplification section to make the installer's work easier.
- Selector switch for inserting tele-power on the UHF input, or on the V+U input depending on the model.
- Status LED for correct power supply and fixing clamp suitable for poles up to 60mm diameter.
- Special calibration model: for these models it is necessary to specify the cutoff between band IV and V when ordering, either 30/31, 31/33, 40/42 or 41/43; in standard models band IV includes channels E21-E35 and band V includes channels E36-E48.
MAP4r345UPRO5G/ | ||
Code | 223772 | |
Input no. | 4 | |
Inputs | III+DAB, 4, 5, UHF (*) | |
DAB, III Frequency | MHz | 174 - 240 |
Frequency IV | MHz | 470 - tar |
V Frequency | MHz | tar - 694 |
Frequency | MHz | 470 - 694 |
Gain | dB | III+DAB: 23; IV: 40; V: 40; UHF: 40 |
Gain adjustment | dB | III+DAB: 15; IV: 15; V: 15; UHF: 15 |
Optical noise figure | dB | III+DAB: 7; UHF: 5 |
Outputs number | 1 | |
Output level | dBµV | III+DAB: 115; UHF: 120 |
Connectors | F female | |
Clipper | Si | |
Filter | 5G | |
Specifications | ||
---|---|---|
Power supply voltage | V | 12 |
Absorption | mA | 150 @12V |
Impedence | Ohm | 75 |
Operating temperature | °C | -10 to +55 |
Protection | IP43 | |
Conformity | EN50083-2: 2006-06 | |
Dimensions and packaging | ||
Pieces | 1 | |
EAN code | 8016978106332 | |
Packaging dimensions | mm | 124 x 57 x 118 |
Product dimensions | mm | 120 x 50 x 105 |
Packaging weight | Kg | 0.265 |
Net Weight | Kg | 0.234 |
Weight | Kg | 0.251 |