SCD2-32IF
Code 271130
IF-IF Headends
Compact IF-IF central unit to convert up to 32 DVB-S/S2 transponders with SCD2 (dCSS) technology; 4 satellite inputs and 2 derivatives with output level for each transponder 86dBµV.
Technical chars
SCD2-32IF: 4 Satellite inputs and 2 t aps with 86dBuV output level for each transponder; sockets up to 90 metres from the headend can be served.
Automatic Gain Control (CAG): maintains adequate output level even when input transponder power varies (from 55dBuV to 85dBuV).
Compatible with both traditional LNB(UX-QT LTE) and Wideband LNB (UX-WB LTE) to manage the 4 polarities of a satellite with only two cables.
LEDs monitor: operation of the part, connection to the USB port, correct product power-up and the presence of any input short-circuit.
In isofrequency configuration; the product can also be used to equalise and amplify an entire satellite polarity.
Fixed (IF-IF) or Dynamic mode (driven by the DiSEqC commands of the SCR or SCD2 decoder).
Configurable slope of the generated signal (up to 8dB, adding to the 15dB in the SCD2-32IF SSA model) to compensate for cable loss in distribution.
Dual power ports to provide more robustness to the system.
External power supply PSU1430F (14V, 3A) included in the package
Compact size, especially when compared to an equivalent IF-IF central unit with 32 programmable filters.
Free PC configuration SW on site, to define via the USB port: input and output frequencies and other control unit configuration parameters (level, tilt, ...).
| SCD2-32IF | ||
| Code | 271130 | |
| Inputs | 4 SAT | |
| Outputs | 2 SAT | |
| Taps | 2 SAT | |
| Transponder no. | 32 | |
| SAT | ||
|---|---|---|
| Bandwidth | MHz | 250-2350 |
| Slope adjustment for transponder | dB | 8 (via SW) |
| AGC | dBµV | 55-85 |
| Maximum input level SAT | dBµV | 97 |
| Max Output level SAT per transponder | dBµV | 86 |
| Max Output level (single tone) | dBµV | 81 |
| Max Output level | dBµV | 101 |
| Taps | ||
| Transponder no. | 32 | |
| Operating method | IF-IF Static / SCR / SCD2 (dCSS) | |
| SAT bandwidth | MHz | 950-2150 |
| Bandwidth SAT per transponder | MHz | 20-60 |
| Sat frequency precision | KHz | < 50 |
| Switching standards | DiSEqC-SCIF 1st and 2nd generation (SCD / SCD2) SCR (EN50494) and SCD2 (EN50607) | |
| Consumption | ||
| Power supply voltage | Vdc/A | 220-240 / 50-60 |
| Mains plug | 2 with F-connectors (the second one is optional, it only serves to make the workpiece more robust) | |
| Current consumption without LNB | mA | 400 @12V |
| Current consumption with LNB | mA | 1100 @12V |
| Maximum power supply current SAT | mA | 600 @12V |
| Specifications | ||
| Dimensions power supply | mm | 120 x 72 x 35 |
| Operating temperature | °C | -10 to +55 |
| SAT-SAT Isolation | dB | >35 |
| Dimensions and packaging | ||
| Pieces | 1 | |
| EAN code | 8016978099443 | |
| Packaging dimensions | mm | 240 x 188 x 72 |
| Product dimensions | mm | 160 x 110 x 30 |
| Packaging weight | Kg | 0.8 |
Title
